| No. | Brand | h | s | H | U | B | L | F | A |
| AH2236G | FAG | - | - | - | - | - | - | - | - |
| AHX2330 | FAG | - | - | - | - | 49.00 mm | - | - | - |
| AH2240 | FAG | - | - | - | - | 63.50 mm | - | - | - |
| AH3238G | FAG | 31.75 mm | - | - | - | - | - | - | - |
| AH2338 | FAG | - | - | - | - | 15.00 mm | - | - | - |
| AH2334 | FAG | - | - | - | - | - | 285.75 mm | - | - |
| AH2252G-H | FAG | - | - | - | - | 31.00 mm | - | - | - |
| AH2236 | FAG | - | - | - | - | 34.00 mm | - | - | - |
| AH2236-H | FAG | - | - | - | - | 38.10 mm | - | - | - |
| AH3152-H | FAG | - | - | - | - | - | - | - | - |
| AH2340-H | FAG | - | - | - | - | - | - | - | - |
| AH3238-H | FAG | - | - | - | - | 21.00 mm | - | - | - |
| AH3340-H | FAG | - | - | - | - | - | - | - | - |
| AH2334-H | FAG | - | - | - | - | 34.90 mm | - | - | - |
| AH2244-H | FAG | - | - | - | - | 40 mm | - | - | - |
| AH3948-H | FAG | - | - | - | - | - | - | - | - |
| AH2248 | FAG | - | - | - | - | 18.00 mm | - | - | - |
| AH3330 | FAG | - | - | - | - | 9.00 mm | - | - | - |
| AH24048 | FAG | - | - | - | - | 30 mm | - | 40 mm | - |
| AH2238 | FAG | - | - | - | - | 33.30 mm | - | - | - |
| FAG AH2338-H Withdrawal sleeves | D:170.0000 mm; d:80.000 mm; Speed Rating-Open and Shielded-Oil OSO:4000 rpm; Basic Radial Load Rating-Dynamic DC:138000 N; Fillet Radius ra:2.00 mm; Basic Radial Load Rating-Static SCO:129000 N; Width - Inner Ring B1:68.26 mm; Accessories:300WI Filling Notch; Diameter E:109.0 mm; Speed Rating-Open and Shielded-Grease OSG:3300 rpm; |
| FAG AH3332-H Withdrawal sleeves | d:60.000 mm; Oil Speed Rating n2:4500 rpm; D:130.0000 mm; Accessories:Two Seals & Snap-Rin; Grease Speed Rating n1:3400 rpm; Basic Static Radial Load Rating Co:143000 N; B:54.00 mm; Basic Dynamic Radial Load Rating C:134000 N; Sealed Speed Rating n3:3400 rpm; Fillet Radius ra:2.00 mm; |
| FAG AH2334G-H Withdrawal sleeves | L:419.1 mm; P180°:72.5 kN; P150°:59.6 kN; End plug (suffix Y):EPR 15; Cap bolt:5/8-11 UNC; Taconite seal:TER 118; H:244.475 mm; PG:1/4 NPT; J max.:368.3 mm; Cap bolt recommended tightening torque:298.3 N·m; |
| FAG AH3148-H Withdrawal sleeves | Grease:7 100 min-1; D:90 mm; Dynamic (Cr):28.216 kN; Pu:0.969 kN; Static (Cor):21.318 kN; Bearing designation:6011 ; rs:1.1 mm; Da:84 max; Weight:0.383 kg; Oil:8 400 min-1; |
| FAG AH3044-H Withdrawal sleeves | rs (min):4 mm; with tapered bore:1 000 min-1; D:460 mm; Dynamic (Cr):9 mm; Pu:2100 kN; with cylindrical bore:800 min-1; Static (Cor):16.7 mm; Grease:3720 kN; d:300 mm; B:118 mm; |
| FAG AH2238G-H Withdrawal sleeves | Limiting speed:4000 r/min; Fw:120 mm; Reference speed:3400 r/min; U:24 mm; Basic static load rating C0:176 kN; Mass needle roller and cage assembly:0.17 kg; Basic dynamic load rating C:56.1 kN; Fatigue load limit Pu:20.4 kN; Ew:127 mm; |
| FAG AH24148-H Withdrawal sleeves | Mass pillow block:262 kg; Ca:117.805 mm; Taconite seal:TER 165; R2:46.831 mm; End plug (suffix Y):EPR 23; H:474.663 mm; Adapter sleeve assembly:SNW 44x7.13/16; Pa:71.2 kN; A2:368.3 mm; RG:1 NPT; |
| FAG AH24152-H Withdrawal sleeves | d:100 mm; H:55 mm; Grease:1 060 min-1; static Cor:628.000 kN; d1:170 mm; rs (min):1.5 mm; D:170 mm; dynamic Cr:266.060 kN; D1:103 mm; Pu:23.710 kN; |
| FAG AH3052 Withdrawal sleeves | R1:122.237 mm; Mass pillow block:181 kg; H:422.275 mm; Eye bolt:2 x 1/2-13 UNC; Max. speed for Taconite seal:340 r/min; Cap bolt, SAE grade:5; A1:203.2 mm; End plug (suffix Y):X-5217-4; Adapter sleeve assembly:SNP 3048x8.15/16; Taconite seal:TER 552; |
| FAG AH2332 Withdrawal sleeves | Mass bearing:80 kg; db min.:299 mm; d:240 mm; r1,2 min.:4 mm; Da min.:299 mm; Basic dynamic load rating C:1980 kN; Calculation factor kr:0.16; da max.:294 mm; ra max.:3 mm; s max.:3.5 mm; |
| FAG AH24052G-H Withdrawal sleeves | d:140.000 mm; Accessories:One Shield; Basic Dynamic Radial Load Rating C:66300 N; Fillet Radius ra:1.50 mm; D:190.0000 mm; Basic Static Radial Load Rating Co:71000 N; Oil Speed Rating Open/Shielded n2:3800 rpm; Grease Speed Rating Open/Shielded n1:3200 rpm; Sealed Speed Rating n3:2000 rpm; B:24.00 mm; |
| FAG AH3348-H Withdrawal sleeves | D:130.0000 mm; Fillet Radius ra:1.50 mm; Sealed Speed Rating n3:3200 rpm; Accessories:No Shield, no Seal,; Grease Speed Rating n1:3200 rpm; Oil Speed Rating n2:4300 rpm; d:75.000 mm; Basic Dynamic Radial Load Rating C:108000 N; Basic Static Radial Load Rating Co:137000 N; B:41.30 mm; |
FAG AH2236G Withdrawal sleeves Video
FAG 22236EK AH2236G Bearing
22236EK AH2236G Bearing Survise. Get Detailed Price. Other models FAG bearing in stock. #; Bearing Model; Brand; In Stock; Mail Inquiry. 1; 22236EK
22236EK AH2236G fag bearing - Biggest Bearing Agent in Asia
22236EK AH2236G fag for sale with high quality and cheap price.Biggest Agent In Asia, Delivery In three Days. Bearing For Sale 22236EK AH2236G fag
22236EK AH2236G fag bearing - Biggest Bearing Agent in Asia
22236EK AH2236G fag for sale with high quality and cheap price.Biggest Agent In Asia, Delivery In three Days. Bearing For Sale 22236EK AH2236G fag
22236EK AH2236G fag bearing - Biggest Bearing Agent in Asia
22236EK AH2236G fag for sale with high quality and cheap price.Biggest Agent In Asia, Delivery In three Days. Bearing For Sale 22236EK AH2236G fag
FAG AH2236G bearing | Super Precision Bearing
We have world class manufacuring facilities using latest technology, machines and equipments.Our bearings qualified rate reach more than 99.2% every year
FAG AH2236G bearing | Super Precision Bearing
We have world class manufacuring facilities using latest technology, machines and equipments.Our bearings qualified rate reach more than 99.2% every year
FAG AH2236G bearing | Super Precision Bearing
We have world class manufacuring facilities using latest technology, machines and equipments.Our bearings qualified rate reach more than 99.2% every year
FAG 22236EK+AH2236G bearing_SKF bearing_NSK
Our professional sales FAG 22236EK+AH2236G bearing, FAG 22236EK+AH2236G bearing related information are: Model 22236EK+AH2236G inner diameter: