| No. | Brand | h | s | H | U | B | L | F | A |
| AH3336 | FAG | - | - | - | - | 70 mm | - | - | - |
| AH2248 | FAG | - | - | - | - | 18.00 mm | - | - | - |
| AH2252G | FAG | - | - | - | - | 1.3750 in | - | - | - |
| AH3336-H | FAG | 63.5 mm | - | 401.637 mm | - | - | - | - | - |
| AH3148 | FAG | - | - | 401.637 mm | - | - | 711.2 mm | - | - |
| AH24152 | FAG | - | - | - | - | 30.20 mm | - | - | - |
| AH3052-H | FAG | - | - | - | - | 82.60 mm | - | - | - |
| AH24140 | FAG | - | - | - | - | 28.00 mm | - | - | - |
| AH2238-H | FAG | - | - | - | - | 13.00 mm | - | - | - |
| AH2340 | FAG | - | - | - | - | 171.45 mm | - | - | - |
| AH3348-H | FAG | - | - | - | - | 41.30 mm | - | - | - |
| AH2332 | FAG | - | - | - | - | - | - | - | - |
| AH2344-H | FAG | - | - | - | - | 36.00 mm | - | - | - |
| AH2248-H | FAG | 46.038 mm | - | - | - | - | - | - | - |
| AH24052 | FAG | - | - | - | - | 19.00 mm | - | - | - |
| AH2236G | FAG | - | - | - | - | - | - | - | - |
| AH24048-H | FAG | - | - | - | - | - | - | - | - |
| AH2340-H | FAG | - | - | - | - | - | - | - | - |
| AH2252-H | FAG | - | - | - | - | 24.00 mm | - | - | - |
| AH2336-H | FAG | - | - | - | - | - | - | - | - |
| AH24144 | FAG | - | - | - | - | 33 mm | - | - | - |
| FAG AH3338-H Withdrawal sleeves | Basic Static Radial Load Rating Co:232000 N; d:90.000 mm; Basic Dynamic Radial Load Rating C:212000 N; Fillet Radius rb:1.00 mm; Oil Speed Rating n2:3600 rpm; Fillet Radius ra:2.00 mm; B:60.00 mm; D:160.0000 mm; Grease Speed Rating n1:3000 rpm; |
| FAG AH3348 Withdrawal sleeves | Ca:67.793 mm; Housing:FSAF 616; P120°:33.8 kN; PG:1/8 NPT; Adapter sleeve assembly:SNW 16x2.3/4; P90°:55.6 kN; Da:170 mm; N1:19.05 mm; L:361.95 mm; Appropriate attachment bolt size G:0.625 in; |
| FAG AH24144 Withdrawal sleeves | rs (min):2 mm; d:80 mm; Oil:34.730 kN; Grease:295 kN; Pu:224 kN; D:140 mm; with cylindrical bore:3 200 min-1; B:33 mm; Static (Cor):5.5 mm; Dynamic (Cr):3 mm; |
| FAG AH3948-H Withdrawal sleeves | Cap bolt:2 x 1/2-13 UNC; N1:15.875 mm; Initial grease fill:68.04 g; J max.:241.3 mm; P90°:21.4 kN; J min.:206.375 mm; Housing:FSAF 311; PG:1/8 NPT; Cap bolt recommended tightening torque:149.1 N·m; Pa:8.9 kN; |
| FAG AH2240-H Withdrawal sleeves | S:4.763 mm; h:42.862 mm; Max. speed for PosiTrac Plus seal:2150 r/min; ba:46.038 mm; R2:26.988 mm; PosiTrac Plus contact element:2 x B10724-44; N1:22.225 mm; H2:44.45 mm; Appropriate attachment bolt size G:0.75 in; Cap bolt:2 x 3/4-10 UNC; |
| FAG AH2248 Withdrawal sleeves | Sealed Speed Rating n3:3100 rpm; Basic Static Radial Load Rating Co:31500 N; D:125.0000 mm; Grease Speed Rating Open/Shielded n1:5000 rpm; d:90.000 mm; Basic Dynamic Radial Load Rating C:32500 N; Accessories:Without Accessories; Oil Speed Rating Open/Shielded n2:6000 rpm; B:18.00 mm; Fillet Radius ra:1.00 mm; |
| FAG AH3152G-H Withdrawal sleeves | D:215.0000 mm; d:100.000 mm; Sealed Speed Rating n3:1800 rpm; Oil Speed Rating n2:2600 rpm; B:82.60 mm; Basic Dynamic Radial Load Rating C:255000 N; Basic Static Radial Load Rating Co:255000 N; Accessories:No Shield, no Seal; Fillet Radius ra:2.50 mm; Grease Speed Rating n1:1800 rpm; |
| FAG AH2352 Withdrawal sleeves | Basic Dynamic Radial Load Rating C:147000 N; B:42.00 mm; Basic Static Radial Load Rating Co:140000 N; Fillet Radius ra:2.50 mm; D:180.0000 mm; Accessories:Without Accessories; d:70.000 mm; Grease Speed Rating Open/Shielded n1:3200 rpm; Oil Speed Rating Open/Shielded n2:3900 rpm; |
| FAG AH24152 Withdrawal sleeves | Oil Speed Rating n2:8500 rpm; Sealed Speed Rating n3:6300 rpm; Grease Speed Rating n1:6300 rpm; Basic Dynamic Radial Load Rating C:41600 N; B:30.20 mm; d:30.000 mm; Accessories:Two Shields; Basic Static Radial Load Rating Co:29000 N; Fillet Radius ra:1.00 mm; D:72.0000 mm; |
| FAG AH2252G-H Withdrawal sleeves | D:80.0000 mm; Fillet Radius ra:1.50 mm; d:35.000 mm; B:31.00 mm; Grease Speed Rating n1:5600 rpm; Basic Dynamic Radial Load Rating C:26500 N; Basic Static Radial Load Rating Co:8500 N; |
| FAG AH2244-H Withdrawal sleeves | Pu:209 kN; Dynamic (Cr):4.5 mm; with tapered bore:2 500 min-1; with cylindrical bore:2 000 min-1; B:40 mm; d:90 mm; Grease:265 kN; rs (min):2 mm; D:160 mm; Static (Cor):8.3 mm; |
| FAG AH3952 Withdrawal sleeves | Pu:0.873 kN; d:25 mm; Bearing designation:6405 ; D:80 mm; rs:1.5 mm; ra:1.5 max; Weight:0.53 kg; Oil:11 000 min-1; da:34 min; Dynamic (Cr):36.000 kN; |
FAG AH3044-H Withdrawal sleeves Video
FAG Withdrawal sleeve for metric shafts AH3044-H | ERIKS
FAG Withdrawal sleeve for metric shafts AH3044-H. ERIKS item #: 12768676. EAN: 4012801307956. Manufacturer partnumber: AH3044-H. Price (Per piece):
Sleeve AH3044-H / FAG 200x220x111 Withdrawal sleeves
AH3044-H / FAG - Withdrawal sleeves AH3044-H Brand:FAG Size:200X220X111 d (inner diameter) 200 mm D (outer diameter) 220 mm B (width) 111 mm W
AH3044H FAG • ABF Store
Product properties. Availability 2 pcs; Brand FAG; Item Number AH3044H FAG; Technical details (H) H=Hydraulic Mounting. Category Adapter / Withdrawal
FAG Withdrawal sleeve for metric shafts AH3044-H | ERIKS shop NL
FAG Withdrawal sleeve for metric shafts AH3044-H. ERIKS item #: 12768676. EAN: 4012801307956. Manufacturer partnumber: AH3044-H. Price (Per piece):
FAG AH3044-H, Withdrawal sleeves - I4Mart
General Descriptions. Brand FAG. Product description. Screw drive bearing arrangements are subjected to requirements that often cannot be optimally fulfilled
FAG AH3044H Bearing, NOKS Bearings
Brand: FAG Bearing; Category: Bearings Accessories; Model: AH3044H; d: 220 mm; m: 7.47 kg; New Model: AH3044-H; Old Model: AH3044H. We export high
FAG AH3044H Withdrawal Sleeve, Metric, 200 mm ID, 111
FAG AH3044H Withdrawal Sleeve, Metric, 200 mm ID, 111 mm Length: Sleeve Bearings: Amazon.com: Industrial & Scientific
FAG Withdrawal sleeve for metric shafts AH3044-H | ERIKS
ERIKS item #: AH3044H-FAG. Catalogue item no 1: 2862813. Catalogue item no 2: W94A-32835. EAN: 4012801307956. Manufacturer partnumber: AH3044-H