| No. | Brand | h | s | H | U | B | L | F | A |
| AH3152G | FAG | - | 2.5 mm | - | - | 54 mm | - | 124 mm | - |
| AH24044 | FAG | - | - | - | - | - | - | - | - |
| AH3140-H | FAG | - | - | - | - | 18.00 mm | - | - | - |
| AH24052-H | FAG | - | - | - | - | 16.00 mm | - | - | - |
| AH3332 | FAG | - | - | - | - | 12.00 mm | - | - | - |
| AH24052G | FAG | - | - | - | - | 54.00 mm | - | - | - |
| AH3138-H | FAG | - | - | - | - | 37 mm | - | - | - |
| AHX2330G | FAG | - | - | - | - | - | - | - | - |
| AH3144 | FAG | - | - | - | - | 65.00 mm | - | - | - |
| AH2332G | FAG | - | - | 62 mm | - | - | - | - | - |
| AH24152 | FAG | - | - | - | - | 30.20 mm | - | - | - |
| AH2334G | FAG | - | - | - | - | 55.00 mm | - | - | - |
| AH2236 | FAG | - | - | - | - | 34.00 mm | - | - | - |
| AH3338-H | FAG | - | - | - | - | 60.00 mm | - | - | - |
| AH2338 | FAG | - | - | - | - | 15.00 mm | - | - | - |
| AH3948-H | FAG | - | - | - | - | - | - | - | - |
| AH2240-H | FAG | 42.862 mm | - | - | - | - | - | - | - |
| AH24138 | FAG | - | - | - | - | 47.60 mm | - | - | - |
| AH3344 | FAG | - | - | - | - | 148 mm | - | - | - |
| AH3152-H | FAG | - | - | - | - | - | - | - | - |
| AH3332-H | FAG | - | - | - | - | 54.00 mm | - | - | - |
| AH3144-H | FAG | - | - | - | - | - | - | - | - |
| AH3952-H | FAG | - | - | - | - | - | - | - | - |
| FAG AH2332 Withdrawal sleeves | Mass bearing:80 kg; db min.:299 mm; d:240 mm; r1,2 min.:4 mm; Da min.:299 mm; Basic dynamic load rating C:1980 kN; Calculation factor kr:0.16; da max.:294 mm; ra max.:3 mm; s max.:3.5 mm; |
| FAG AH3048 Withdrawal sleeves | S:4.763 mm; Eye bolt:2 x 3/8-16 UNC; Adapter sleeve assembly:SNW 30x5.3/8; P120°:87.2 kN; H1:160.325 mm; ba:65.088 mm; Cap bolt, SAE grade:5; Max. speed for PosiTrac Plus seal:1075 r/min; H2:63.5 mm; J max.:463.55 mm; |
| FAG AH3334-H Withdrawal sleeves | Recommended diameter for attachment bolts, inch G:0.375 in; s1:21 mm; T:40 mm; Bearing:YSPAG 205; A3:3.2 mm; d:25 mm; N:12.3 mm; A1:15 mm; L:70 mm; End cover:ECY 205; |
| FAG AH2238-H Withdrawal sleeves | D:80.0000 mm; B:13.00 mm; d:55.000 mm; Fillet Radius ra:1.00 mm; Fillet Radius rb:0.30 mm; Basic Dynamic Radial Load Rating C:22900 N; Basic Static Radial Load Rating Co:20400 N; Grease Speed Rating n1:18000 rpm; Oil Speed Rating n2:27000 rpm; |
| FAG AH24044 Withdrawal sleeves | Calculation factor Y0:1.8; r3,4 min.:2.5 mm; b:15 mm; Calculation factor e:0.35; D:130 mm; 2B:92 mm; Calculation factor Y1:1.9; Mass bearing pair:6.06 kg; Reference speed:3200 r/min; r5 min.:1 mm; |
| FAG AH3238 Withdrawal sleeves | Appropriate attachment bolt size G:0.625 in; Bearing limiting speed:6000 r/min; A1:88.9 mm; Bearing:1314; Cap bolt:2 x 5/8-11 UNC; P180°:37.8 kN; ba:34.131 mm; Da:150 mm; Initial grease fill:175.77 g; H1:95.25 mm; |
| FAG AH3138-H Withdrawal sleeves | GN:1/4-28 SAE-LT; Recommended tightening torque for grub screw:6.5 N·m; Housing material:Cast iron; A1:14 mm; SWN:7 mm; J:148.5 mm; d:44.45 mm; N:16 mm; B:37 mm; Thread grub screw G2:5/16-24 UNF; |
| FAG AH3238G Withdrawal sleeves | J min.:244.475 mm; h:31.75 mm; S:4.763 mm; Initial grease fill:175.77 g; P60°:83.2 kN; J max.:279.4 mm; R1:53.181 mm; Cap bolt, SAE grade:5; Max. speed for PosiTrac Plus seal:1450 r/min; A2:126.603 mm; |
| FAG AH3044-H Withdrawal sleeves | rs (min):4 mm; with tapered bore:1 000 min-1; D:460 mm; Dynamic (Cr):9 mm; Pu:2100 kN; with cylindrical bore:800 min-1; Static (Cor):16.7 mm; Grease:3720 kN; d:300 mm; B:118 mm; |
| FAG AH2236G-H Withdrawal sleeves | Fillet Radius ra:1.00 mm; Sealed Speed Rating n3:3000 rpm; Oil Speed Rating Open/Shielded n2:5600 rpm; D:125.0000 mm; Grease Speed Rating Open/Shielded n1:4800 rpm; B:13.00 mm; Basic Dynamic Radial Load Rating C:20300 N; d:100.000 mm; Basic Static Radial Load Rating Co:22000 N; Accessories:One Shield; |
| FAG AH24144-H Withdrawal sleeves | d:95.000 mm; Basic Static Radial Load Rating Co:33500 N; Accessories:Two Shields; D:130.0000 mm; Basic Dynamic Radial Load Rating C:33800 N; B:18.00 mm; Oil Speed Rating Open/Shielded n2:5600 rpm; Fillet Radius ra:1.00 mm; Grease Speed Rating Open/Shielded n1:4800 rpm; Sealed Speed Rating n3:2900 rpm; |
| FAG AH3144 Withdrawal sleeves | D:290.0000 mm; Basic Static Radial Load Rating Co:228000 N; Oil Speed Rating Open/Shielded n2:2900 rpm; B:65.00 mm; Accessories:Two Shields; Sealed Speed Rating n3:1600 rpm; Grease Speed Rating Open/Shielded n1:2400 rpm; d:105.000 mm; Fillet Radius ra:3.00 mm; Basic Dynamic Radial Load Rating C:247000 N; |
FAG AH24048 Withdrawal sleeves Video
FAG AH24048H Withdrawal Sleeve, Metric, 220 mm ID, 138
Brand Name, FAG Bearings. Ean, 4012801307567. Length, 138 millimeters. Measurement System, Metric. Number of Items, 1. Part Number, AH24048-H
FAG AH24048-H Withdrawal Sleeves - AH24048-H bearing
Brand Name: FAG. Model Number: AH24048-H. Weight: 0.119. Long Description: 30MM Bore; 55MM Outs. Outer Race Width: 0.512 Inch | 13 Mill. Noun
FAG (Schaeffler) - AH24048-H - Motion Industries
FAG (Schaeffler) AH24048-H. AH24048-H Withdrawal Sleeve, Overall Length: 153mm, Thread Size: Tr250x4mm, Compatible Bearing Number: 24048
FAG AH24048-H Withdrawal Sleeves - AH24048-H bearing
Brand Name: FAG. Model Number: AH24048-H. Weight: 0.119. Long Description: 30MM Bore; 55MM Outs. Outer Race Width: 0.512 Inch | 13 Mill. Noun
FAG AH24048-H, Withdrawal sleeves - I4Mart
General Descriptions. Brand FAG. Product description. Screw drive bearing arrangements are subjected to requirements that often cannot be optimally fulfilled
FAG AH24048H Withdrawal Sleeve, Metric, 220 mm ID, 138
Brand Name, FAG Bearings. Ean, 4012801307567. Length, 138 millimeters. Measurement System, Metric. Number of Items, 1. Part Number, AH24048-H
FAG (Schaeffler) - AH24048-H - Motion Industries
FAG (Schaeffler) AH24048-H. AH24048-H Withdrawal Sleeve, Overall Length: 153mm, Thread Size: Tr250x4mm, Compatible Bearing Number: 24048
FAG AH24048-H, Withdrawal sleeves - I4Mart
General Descriptions. Brand FAG. Product description. Screw drive bearing arrangements are subjected to requirements that often cannot be optimally fulfilled