| No. | Brand | h | s | H | U | B | L | F | A |
| AH2238G | FAG | - | - | - | - | 56.00 mm | - | - | - |
| AH2344 | FAG | - | - | - | - | 58.70 mm | - | - | - |
| AH24144 | FAG | - | - | - | - | 33 mm | - | - | - |
| AH3236G | FAG | - | - | - | - | 19.1 mm | - | - | - |
| AH2338-H | FAG | - | - | - | - | - | - | - | - |
| AH3340-H | FAG | - | - | - | - | - | - | - | - |
| AH3052 | FAG | - | - | 422.275 mm | - | - | - | - | - |
| AH3348 | FAG | - | - | - | - | - | 361.95 mm | - | - |
| AH3138 | FAG | - | - | - | - | 15.00 mm | - | - | - |
| AH2238-H | FAG | - | - | - | - | 13.00 mm | - | - | - |
| AH2240 | FAG | - | - | - | - | 63.50 mm | - | - | - |
| AH2236G | FAG | - | - | - | - | - | - | - | - |
| AH3238-H | FAG | - | - | - | - | 21.00 mm | - | - | - |
| AH2252-H | FAG | - | - | - | - | 24.00 mm | - | - | - |
| AH3334 | FAG | - | - | - | - | 301.625 mm | - | - | - |
| AH24138 | FAG | - | - | - | - | 47.60 mm | - | - | - |
| AH2336 | FAG | - | - | - | - | 56 mm | - | - | - |
| AH2238 | FAG | - | - | - | - | 33.30 mm | - | - | - |
| AH3344-H | FAG | - | - | - | - | 46.00 mm | - | - | - |
| AH3238G | FAG | 31.75 mm | - | - | - | - | - | - | - |
| AH3240-H | FAG | - | - | - | - | - | - | - | - |
| AH3048-H | FAG | - | - | - | - | - | - | - | - |
| AH3338 | FAG | - | - | - | - | - | - | - | - |
| AH24044-H | FAG | - | - | - | - | 24.00 mm | - | - | - |
| FAG AH3332-H Withdrawal sleeves | d:60.000 mm; Oil Speed Rating n2:4500 rpm; D:130.0000 mm; Accessories:Two Seals & Snap-Rin; Grease Speed Rating n1:3400 rpm; Basic Static Radial Load Rating Co:143000 N; B:54.00 mm; Basic Dynamic Radial Load Rating C:134000 N; Sealed Speed Rating n3:3400 rpm; Fillet Radius ra:2.00 mm; |
| FAG AH3044-H Withdrawal sleeves | rs (min):4 mm; with tapered bore:1 000 min-1; D:460 mm; Dynamic (Cr):9 mm; Pu:2100 kN; with cylindrical bore:800 min-1; Static (Cor):16.7 mm; Grease:3720 kN; d:300 mm; B:118 mm; |
| FAG AH2336 Withdrawal sleeves | Da max.:169 mm; B:56 mm; Calculation factor e:0.3; Basic static load rating C0:585 kN; d1:100 mm; B1:81 mm; b:8.3 mm; ra max.:2 mm; Calculation factor Y1:2.3; Mass bearing + sleeve:7.7 kg; |
| FAG AH24140 Withdrawal sleeves | Basic Dynamic Radial Load Rating C:92300 N; Oil Speed Rating Open/Shielded n2:3200 rpm; Fillet Radius ra:2.00 mm; Sealed Speed Rating n3:1700 rpm; D:220.0000 mm; d:160.000 mm; B:28.00 mm; Accessories:Without Accessories; Grease Speed Rating Open/Shielded n1:2600 rpm; Basic Static Radial Load Rating Co:98000 N; |
| FAG AH2334-H Withdrawal sleeves | Basic Dynamic Radial Load Rating C:49400 N; d:35.000 mm; Grease Speed Rating n1:5600 rpm; Oil Speed Rating n2:7500 rpm; Basic Static Radial Load Rating Co:34500 N; D:80.0000 mm; Accessories:Shield & Seal; Sealed Speed Rating n3:5600 rpm; Fillet Radius ra:1.50 mm; B:34.90 mm; |
| FAG AH3948-H Withdrawal sleeves | Cap bolt:2 x 1/2-13 UNC; N1:15.875 mm; Initial grease fill:68.04 g; J max.:241.3 mm; P90°:21.4 kN; J min.:206.375 mm; Housing:FSAF 311; PG:1/8 NPT; Cap bolt recommended tightening torque:149.1 N·m; Pa:8.9 kN; |
| FAG AH24144-H Withdrawal sleeves | d:95.000 mm; Basic Static Radial Load Rating Co:33500 N; Accessories:Two Shields; D:130.0000 mm; Basic Dynamic Radial Load Rating C:33800 N; B:18.00 mm; Oil Speed Rating Open/Shielded n2:5600 rpm; Fillet Radius ra:1.00 mm; Grease Speed Rating Open/Shielded n1:4800 rpm; Sealed Speed Rating n3:2900 rpm; |
| FAG AH2252G-H Withdrawal sleeves | D:80.0000 mm; Fillet Radius ra:1.50 mm; d:35.000 mm; B:31.00 mm; Grease Speed Rating n1:5600 rpm; Basic Dynamic Radial Load Rating C:26500 N; Basic Static Radial Load Rating Co:8500 N; |
| FAG AH24048 Withdrawal sleeves | r, r1,2 min.:0.3 mm; Mass inner ring:0.067 kg; d:35 mm; B:30 mm; F:40 mm; |
| FAG AH2334G-H Withdrawal sleeves | L:419.1 mm; P180°:72.5 kN; P150°:59.6 kN; End plug (suffix Y):EPR 15; Cap bolt:5/8-11 UNC; Taconite seal:TER 118; H:244.475 mm; PG:1/4 NPT; J max.:368.3 mm; Cap bolt recommended tightening torque:298.3 N·m; |
| FAG AH2332G-H Withdrawal sleeves | Hydraulic nut:HMV 20 E; Locking device:MB 20; G:M 100x2; d1:88.9 mm; B4:20 mm; d3:130 mm; Lock nut:KM 20; B1:76 mm; d:100 mm; B:18 mm; |
| FAG AH2340-H Withdrawal sleeves | Hydraulic nut:HMVC 76E; Locking plate:PL 76; B1:301.422 mm; d:360 mm; Sleeve:S 3276x13.15/16; Threads per inch:5; B5:59.766 mm; d1:354.012 mm; Lock nut:N 076; Mass adapter sleeve assembly:66 kg; |
FAG AH3152G Withdrawal sleeves Video
FAG AH3152G Bearing | Bearing Model: AH3152G - NNB Bearings
FAG AH3152G Bearing,FAG AH3152G Argentina,FAG bearings Applications. Any bearing right at the tip of your finger. NNB Bearings provides quality precision
AH3152G-H FAG • ABF Store
AH3152G-H FAG available at ABF.store ✓ Same-day shipment ✓ 8.000.000 bearings and electric motors ✓ Worldwide delivery ✓ Customer Service in 8
AH3152G - FAG Bearing - AH3152G Algeria - NNB Bearings
FAG AH3152G Bearing. Any bearing right at the tip of your finger. NNB Bearings provides quality precision bearings of all types at competitive prices. Our goal is
Spherical Roller Bearings 23152-K-MB+AH3152G FAG
Spherical Roller Bearings 23152-K-MB+AH3152G FAG are commonly used in agricultural machines such as combined harvesting machine, air-blower,
FAG AH3152G Bearing | Bearing Model: AH3152G - NNB Bearings
FAG AH3152G Bearing,FAG AH3152G Argentina,FAG bearings Applications. Any bearing right at the tip of your finger. NNB Bearings provides quality precision
AH3152G-H FAG • ABF Store
AH3152G-H FAG available at ABF.store ✓ Same-day shipment ✓ 8.000.000 bearings and electric motors ✓ Worldwide delivery ✓ Customer Service in 8
Bearing 23152-K-MB+AH3152G (FAG) | Size and
Spherical roller bearings 23152-K-MB+AH3152G. Bearing number : 23152-K-MB+AH3152G. Size (mm) : 260x440x144. Brand : FAG. Bore Diameter (mm) : 260
Spherical Roller Bearings 23152-K-MB+AH3152G FAG
Spherical Roller Bearings 23152-K-MB+AH3152G FAG are commonly used in agricultural machines such as combined harvesting machine, air-blower,