| 68761A Franke Slewing Ring Bearings | d:41,275 mm; H:54 mm; N:17 mm; N1:21 mm; Bore Diameter (mm):41,275; A:54 mm; B:49,2 mm; Width (mm):49,2; Basic static load rating (C0):21,3 kN; L1:60 mm; Weight:2,2 Kg; L:190 mm; J:146 mm; Bolt (G):M14; H2:106 mm; S:19 mm; H1:17 mm; Basic dynamic load rating (C):34,1 kN; Bearing number:UCP209-26; |
| 11-25 1355/1-0316 IMO Slewing Ring Bearings | h:78 mm; l7 min.:25 mm; dk:34,93 mm; Weight:0,382 Kg; Thread (G):M20×1,5; d2:46 mm; Angle:15 °; Basic dynamic load rating (C):31 kN; d:20 mm; B:25 mm; r min.:0,6 mm; l1 min.:47 mm; C1:18 mm; Bearing number:SABP20S; Bore Diameter (mm):20; l2 max.:101 mm; |
| 77286B Franke Slewing Ring Bearings | Outer Diameter (mm):184,15; da min.:132 mm; Width (mm):82,55; Basic static load rating (C0):775 kN; s:3 mm; B:82,55 mm; Basic dynamic load rating (C):360 kN; F:146,05 mm; D:184,15 mm; Da max.:172 mm; Size (mm):120.65x184.15x82.55; d:120,65 mm; r min.:3 mm; (Grease) Lubrication Speed:1 800 r/min; C:76,2 mm; Bearing number:MR9211648+MI-769248; Bore Diameter (mm):120,65; Weight:7,48 Kg; ra max.:3 mm; |
| MTE-210T Kaydon Slewing Ring Bearings | d:85 mm; C:28 mm; Bore Diameter (mm):85; Size (mm):85x150x28; B:28 mm; D:150 mm; Angle (α):40 °; Width (mm):28; Bearing number:7217 B; Outer Diameter (mm):150; a:63,3 mm; |
| 68592A Franke Slewing Ring Bearings | ra max.:3,5 mm; Bore Diameter (mm):82,55; Dynamic load, C:180 kN; Basic dynamic load rating (C):180 kN; e:0.44; da:100 mm; ra1 max.:3,3 mm; Size (mm):82.55x152.4x39.688; Max operating temperature, Tmax:120 °C; d:82,55 mm; B:36,322 mm; Basic static load rating (C0):279 kN; Minimum Buy Quantity:N/A; Fatigue limit load, Cu:32.1 kN; ra max:3.5 mm; Characteristic outer ring frequency, BPF0:10.76 Hz; Characteristic rolling element frequency, BSF:9.18 Hz; |
| 68669A Franke Slewing Ring Bearings | Bearing No.:MJH-14161; (Refer.)Mass(kg):0.048; Size (mm):22.225x30.163x25.40; Outer Diameter (mm):30.163; D:30.163 mm; Oil lub.:15000; Bore Diameter (mm):22.225; Width (mm):25.40; Basic dynamic load rating (C):25.40 kN; Fw:22.225 mm; Y(max):1.27; C0r:37.37; Cr:25.40; Mounting inner ring:IR-1016; Grease lub.:9800; Weight:0.048 Kg; Cu:5.80; (Grease) Lubrication Speed:9800 r/min; C:25.40 mm; Basic static load rating (C0):37.37 kN; |
| 77284A Franke Slewing Ring Bearings | Y1 - Geometry Factor:2.73; Dimension F:16.00 in; Dimension L:4.94 in; Grease Lubrication - M/N Seal:900 rpm; Shaft Tolerance:0.0030 in; Dimension RVV:0.57 in; Dimension C:5.5 in; Pre Install Clearance Min:0.0053 in; Weight:87 lb; Engineering Group:Mounted Bearing; Oil Lubrication - T Seal:1700 rpm; Float:0.083 in; Dimension D Min:11.88 in; Dimension G:4.7500 in; Full Timken Part Number:QVVPH22V400SB; |
| 10-20 0741/0-32042 IMO Slewing Ring Bearings | r(min):3; D:340 mm; Cr:2480; C:260 mm; Cu:549; Bore Diameter (mm):230; r1 min.:3 mm; Weight:81.2 Kg; Outer Diameter (mm):340; da(min):244; rb(max):2.5; Da(max):326; Basic dynamic load rating (C):2310 kN; B:260 mm; Width (mm):260; Fw:261 mm; Size (mm):230x340x260; d:230 mm; r1(min):3; Bearing number:46FC34260; |