| 68763A Franke Slewing Ring Bearings | Shaft Tolerance:0.0030 in; Int Radial Clearance Reduction Max:0.0015 in; Oil Lubrication - M/N Seal:2200 rpm; Housing Style:Cartridge; Adapter Sleeve Axial Movement Max:0.022 in; Grease Lubrication - B/C/O Seal:1600 rpm; Dimension G:2.180 in; Shaft Size :50 mm; Dimension S:2.32 in; Dimension B:0.91 in; Dimension M:1.4 in; Post Install Int Radial Clearance Min:0.0015 in; Dimension C:2.95 in; |
| 74155A Franke Slewing Ring Bearings | Fw:121,5 mm; d:95 mm; B:67 mm; Size (mm):95x200x67; Width (mm):67; Basic static load rating (C0):370 kN; Basic dynamic load rating (C):500 kN; D:200 mm; C:67 mm; Weight:10,4 Kg; Bearing number:NJ2319; (Grease) Lubrication Speed:2800 r/min; Bore Diameter (mm):95; Outer Diameter (mm):200; |
| 68793A Franke Slewing Ring Bearings | ra (max):4 mm; Da (max):478 mm; r1:5 mm; db (max):336 mm; B:80 mm; Limiting Speed - Grease:1,200 rpm; Static Load Rating:1,680,000 N; Dynamic Load Rating:1,140,000 N; Inside Ring Outside Diameter:340 mm; Configuration:Single Row; Bore Type:Cylindrical Bore; Enclosure:Open; dc (min):343 mm; dd (min):365 mm; d:280 mm; ra1 (max):4 mm; Limiting Speed - Oil:1,400 rpm; Fillet Radius/Chamfer:5 mm; db (min):302 mm; |
| 68781A Franke Slewing Ring Bearings | C:23,02 mm; Bore Diameter (mm):41,275; ra max:3.5 mm; e:0.55; Y2:1.1; Width (mm):30,162; Bearing number:4T-HM804840/HM804810; Basic dynamic load rating (C):109 kN; (Grease) Lubrication Speed:4 000 r/min; da:61 mm; Min operating temperature, Tmin:-40 °C; Rating life coefficient, A2:1.4; d1:73.5 mm; (Oil) Lubrication Speed:5 300 r/min; Da:81 mm; Minimum Buy Quantity:N/A; Outer Diameter (mm):95,25; Characteristic rolling element frequency, BSF:6.91 Hz; |
| MTO-143 Kaydon Slewing Ring Bearings | a:30 mm; Basic static load rating (C0):12,9 kN; Basic dynamic load rating (C):20,3 kN; Bearing number:7302 A-UO; Size (mm):15x42x26; B1:26 mm; Outer Diameter (mm):42; Weight:0,176 Kg; d:15 mm; Bore Diameter (mm):15; D:42 mm; Width (mm):26; (Grease) Lubrication Speed:16000 r/min; Angle (α):25 °; |
| 12-20 0311/1-32202 IMO Slewing Ring Bearings | Bore Diameter (mm):80; Basic dynamic load rating (C):122,85 kN; Weight:13,9 Kg; Bearing number:EXF316; A2:103,9 mm; A1:27 mm; B1:106,4 mm; A:68 mm; e:38 mm; N:31 mm; Thread (G):M10x1; d:80 mm; D2:119 mm; s:40,5 mm; J:196 mm; L:250 mm; |
| 90-20 0541/0-37022 IMO Slewing Ring Bearings | Shaft Size (ds) - 85 -0 / -0.054:85 0 / 0.054; Housing Bore Dia. (Dh):90 +0.035 / +0; Bearing Outside Diameter, Nominal(Do):90.000; ID Chamfer Angle (B deg.):45; Bore Diameter (mm):85; Shaft Dia., Nominal (d):85.0000; Average Clearance (Cd):0.1150; Bearing Bore after Mounting (di):85.155 / 85.02; ID Chamfer Length (Ci):0.600; Bearing Length, Nominal (B):40.000; Outer Diameter (mm):90; Bearing Length Tolerance (B tol.) - +0 / -0.40:+0 / 0.40; |
| 11-25 0855/1-0311 IMO Slewing Ring Bearings | K - Factor7:1.74; Cup Part Number:25520D; Series:25500; C - Double Cup Width:1.8750 in; B - Cone Width:1.4125 in; Cg - Geometry Factor11:0.0801; e - ISO Factor8:0.33; C90(2) - Dynamic Radial Rating (Two-Row, 90 million revolutions)5:9180 lbf; Da - Cup Frontface Backing Diameter:3.05 in; Design Units:Imperial; Ab - Cage-Cone Frontface Clearance:0.06 in; r - Cup Frontface To Clear Radius2:0.03 in; T - Bearing Width across Cones:3.0750 in; |