| MTO-122T Kaydon Slewing Ring Bearings | Shaft Size:6-11/16 in; Series Type:Heavy Series; Housing Width:9.6 in; Bearing - Housing - Seal:HSE611BRH; Support Type:Four-Bolt Plummer Bl; Ca - Axial Load Rating:17805 lbf; Dimension K:5.5 in; Bolt Size:4 x M30; Dimension M:9.0 in; Dimension L:29.0 in; Maximum Speed:1110 rpm; Bearing Type:Split Cylindrical Re; Dimension H1:2.4 in; Bearing Number:HSE611BR; Dimension H:10.512 in; Dimension J:24.7 in; |
| 10-20 0413/0-32012 IMO Slewing Ring Bearings | Size (mm):32x67x40; d:32 mm; B:40 mm; Bearing number:AU0603-2LLX/L260; Bore Diameter (mm):32; D:67 mm; C:40 mm; Outer Diameter (mm):67; Width (mm):40; |
| 68573A Franke Slewing Ring Bearings | B2:5.313 in; Series:223K and 232K; Tolerance1:-0.005 in; Diameter d :4 13/16 in; Locknut:AN-28; S:1.063 in; Lockwasher and Lockplates:W-28; Bearing Number:22328K, 23228K; D1:7.099 in; Sleeve:S-128 x 4 13/16; Taper:1:12; SNW/SNP Assembly Weight:12.2 lb; |
| 68653A Franke Slewing Ring Bearings | Outer Diameter (mm):140; D:140 mm; Bearing number:NU 2216; Width (mm):33; Basic dynamic load rating (C):147 kN; d:80 mm; (Grease) Lubrication Speed:4000 r/min; Fw:95.3 mm; B:33 mm; Size (mm):80x140x33; Basic static load rating (C0):186 kN; Weight:1.96 Kg; r min.:2 mm; Bore Diameter (mm):80; r1 min.:2 mm; |
| 12-20 0841/1-32252 IMO Slewing Ring Bearings | r min.:1 mm; B:25 mm; Basic dynamic load rating (C):73,4 kN; Da:168 mm; D:180 mm; Bearing number:CRBH 12025 A; Outer Diameter (mm):180; Size (mm):120x180x25; Weight:2,62 Kg; da:132 mm; Width (mm):25; Bore Diameter (mm):120; d:120 mm; |
| 74155A Franke Slewing Ring Bearings | Fw:121,5 mm; d:95 mm; B:67 mm; Size (mm):95x200x67; Width (mm):67; Basic static load rating (C0):370 kN; Basic dynamic load rating (C):500 kN; D:200 mm; C:67 mm; Weight:10,4 Kg; Bearing number:NJ2319; (Grease) Lubrication Speed:2800 r/min; Bore Diameter (mm):95; Outer Diameter (mm):200; |
| 68655A Franke Slewing Ring Bearings | Oil Lubrication - B/C/O Seal:1800 rpm; Pre Install Clearance Max:0.0037 in; Dimension RV:0.03 in; UPC Code:0883450089845; Full Timken Part Number:QVC11V115SB; Float:0.050 in; Shaft Size Type:Imperial; Y1 - Geometry Factor:2.95; Eng Internal Radial Clearance - Min:0.0030; Shaft Size :1-15/16 in; Dimension C:2.990 in; Dimension E:3.80 in; Oil Lubrication - M/N Seal:2200 rpm; Grease Lubrication - B/C/O Seal:1600 rpm; |
| 77266A Franke Slewing Ring Bearings | Housing Counterbore Diameter Tolerance (HD tol.):+0.12 / 0; Material:Bronze shell with PT; Washer Outside Diameter Tolerance (Do tol.) - +0 / -0.25:+0 / 0.25; Bearing Outside Diameter, Nominal(Do):26.000; Outer Diameter (mm):26; Bearing number:AST11 WC14; Washer Inside Diameter Tolerance (di tol.) - +0.25 / -0:+0.25 / 0; Housing Counterbore Diameter, Nominal (HD):26.000; Bearing Type:thrust washer; |