| 90-20 0941/0-37062 IMO Slewing Ring Bearings | Basic static load rating (C0):373 kN; Size (mm):95x170x43; S:2,2 mm; Bearing number:NU2219-E-M6; Weight:3,8 Kg; r2 min.:2,1 mm; r3 min.:2,1 mm; D:170 mm; r1 min.:2,1 mm; d:95 mm; Width (mm):43; C:43 mm; r4 min.:2,1 mm; F:112,5 mm; B:43 mm; Basic dynamic load rating (C):320 kN; Bore Diameter (mm):95; Outer Diameter (mm):170; |
| RK6-16E1Z Kaydon Slewing Ring Bearings | Basic static load rating (C0):203 kN; r1 min.:2.1 mm; d:65 mm; r min.:2.1 mm; Fw:89.3 mm; Ew:135.3 mm; Outer Diameter (mm):135.3; Bore Diameter (mm):65; B:37 mm; (Grease) Lubrication Speed:4000 r/min; Weight:3.58 Kg; D:160 mm; Bearing number:NP 413; Basic dynamic load rating (C):195 kN; |
| MTO-265T Kaydon Slewing Ring Bearings | Category:Bearings; Product Group:B04311; Width (mm):17; Outer Diameter (mm):62; d:22 mm; Size (mm):22x62x17; Bore Diameter (mm):22; Bearing number:22BC06S5XNC2; Inventory:0.0; Manufacturer Name:NACHI; B:17 mm; C:17 mm; Minimum Buy Quantity:N/A; D:62 mm; |
| 10-25 1155/0-0304 IMO Slewing Ring Bearings | da min.:25,6 mm; Basic dynamic load rating (C):20 kN; d:20 mm; B:20,6 mm; Basic static load rating (C0):12 kN; Size (mm):20x47x20.6; D:47 mm; d1:27,7 mm; Fatigue load limit (Pu):0,51; Da max.:41,4 mm; Weight:0,16 Kg; Bearing number:3204A-2Z; r2 min.:1 mm; da max:27,5 mm; ra max.:1 mm; D1:40,9 mm; Outer Diameter (mm):47; C:20,6 mm; a:28 mm; Bore Diameter (mm):20; |
| 68683A Franke Slewing Ring Bearings | Bore Diameter (mm):35; Characteristic inner ring frequency, BPFI:9.92 Hz; Basic static load rating (C0):17,6 kN; Fw:35 mm; Nlim (grease):4,700 rpm; Max operating temperature, Tmax:120 °C; Characteristic outer ring frequency, BPF0:8.08 Hz; Min operating temperature, Tmin:-20 °C; Bearing number:HMK3512; Lw:6.8 mm; Cr:14.9 kN; Weight:0.040 Kg; D:45 mm; Characteristic cage frequency, FTF:0.45 Hz; Lubrication hole on outer ring:Non/No; |
| 77270A Franke Slewing Ring Bearings | α:16 °; Bearing number:GEH 120 TXG3A-2LS; Mass plain bearing:14.9 kg; Da - max.:202 mm; r2 min.:1 mm; Design (sliding contact surface combination):Steel/PTFE fabric; ra - max.:1 mm; da max.:138 mm; C:70 mm; rb max.:1 mm; B:115 mm; Da max.:202 mm; Outer Diameter (mm):120; d:120 mm; ra max.:1 mm; Lubricant:Maintenance free &nd; Size (mm):210x120x115; Sealing solution:Triple-lip seals; Basic dynamic load rating - C:3000 kN; |
| 10-25 0955/0-0302 IMO Slewing Ring Bearings | Bearing number:6209-2RS; Basic dynamic load rating (C):34,4 kN; Outer Diameter (mm):85; Basic static load rating (C0):21,17 kN; Size (mm):45x85x19; C:19 mm; B:19 mm; D:85 mm; Width (mm):19; d:45 mm; Weight:0,41 Kg; Bore Diameter (mm):45; |
| 77284A Franke Slewing Ring Bearings | Y1 - Geometry Factor:2.73; Dimension F:16.00 in; Dimension L:4.94 in; Grease Lubrication - M/N Seal:900 rpm; Shaft Tolerance:0.0030 in; Dimension RVV:0.57 in; Dimension C:5.5 in; Pre Install Clearance Min:0.0053 in; Weight:87 lb; Engineering Group:Mounted Bearing; Oil Lubrication - T Seal:1700 rpm; Float:0.083 in; Dimension D Min:11.88 in; Dimension G:4.7500 in; Full Timken Part Number:QVVPH22V400SB; |